Page 1 of 1

Bricked Scroll 8"

PostPosted: May 23rd, 2012, 9:32 am
by MehdiChater
Hi all ,
I wrongly updated my Scroll 8" V2 8Gb using FWDN ,
failed at CRC check ( cuz of wrong firmware )
now splash screen has changed ( a bit smaller , i guess it's made for a 7" )
I only have access to bootloader ( fastboot / vid:18d1 pid:dood ) and usbboot ( fwdn / vid:140e pid:b071 )
tried restoring my nandroid backup , already made via cwm recovery ( boot , cache , data , recovery , system )
all went fine , but still the same problem , my Scroll hang at splash creen then turn off .

I guess the only solution is writing back lk.rom and tcc8902_mtd , can any Scroll 8" V2 owner make a backup for me ????

Re: Bricked Scroll 8"

PostPosted: June 12th, 2012, 4:50 pm
by Trashcooky
MehdiChater wrote:Hi all ,
I wrongly updated my Scroll 8" V2 8Gb using FWDN ,
failed at CRC check ( cuz of wrong firmware )
now splash screen has changed ( a bit smaller , i guess it's made for a 7" )
I only have access to bootloader ( fastboot / vid:18d1 pid:dood ) and usbboot ( fwdn / vid:140e pid:b071 )
tried restoring my nandroid backup , already made via cwm recovery ( boot , cache , data , recovery , system )
all went fine , but still the same problem , my Scroll hang at splash creen then turn off .

I guess the only solution is writing back lk.rom and tcc8902_mtd , can any Scroll 8" V2 owner make a backup for me ????


This is an extremely long shot, but you could try contacting Storage Options help/support and see if they are prepared to send you a stock firmware image for your tablet.

Re: Bricked Scroll 8"

PostPosted: June 12th, 2012, 5:54 pm
by Charlie
Sorry to be the bearer of bad news, to date any Scroll tablet that gets flashed with firmware or anything else for that matter via FWDN will render the tablet useless and there is NO way back that is know to man at present for this scenario with a Scroll tablet, maybe that will change one day but for now and the last 2 years this has been the case.