Page 1 of 2

HELP! I need somebody, HELP! Not just anybody! HEEEEELP!

PostPosted: January 28th, 2011, 12:34 pm
by Detection
When I was younger so much younger than todaaaaay, I had a working scroll that worked in every single way -

But now I installed update.zip FW 1.02 - And I have lost my CWM !

I cant restore my scroll.... What can I do ?

Re: HELP! I need somebody, HELP! Not just anybody! HEEEEELP!

PostPosted: January 28th, 2011, 12:37 pm
by Charlie
Detection wrote:When I was younger so much younger than todaaaaay, I had a working scroll that worked in every single way -

But now I installed update.zip FW 1.02 - And I have lost my CWM !

I cant restore my scroll.... What can I do ?


can u get on IRC, now - then i can help OR try this,

go to system/etc/install-recovery.sh

rename the file (install-recovery.sh) to install-recovery.sh.old

Reboot into OS, then

Re-flash CWM - like you did b4 (ie Warpedflash's 'how to') CWM should be back.

Re: HELP! I need somebody, HELP! Not just anybody! HEEEEELP!

PostPosted: January 28th, 2011, 12:49 pm
by Detection
Be on IRC soon - Just reinstalled the CWM via the .bat files, fingers crossed lol

Re: HELP! I need somebody, HELP! Not just anybody! HEEEEELP!

PostPosted: January 28th, 2011, 12:52 pm
by Charlie
Detection wrote:Be on IRC soon - Just reinstalled the CWM via the .bat files, fingers crossed lol



if you have not done this:-

go to system/etc/install-recovery.sh

rename the file (install-recovery.sh) to install-recovery.sh.old

this must be done otherwise it will flash back 'stock recovery' on re-boot

(see my post - January 26th, 2011, 9:42. here http://scrolltabletforum.co.uk/site/viewtopic.php?f=21&t=457#p4802

Re: HELP! I need somebody, HELP! Not just anybody! HEEEEELP!

PostPosted: January 28th, 2011, 12:53 pm
by Detection
Ok I didnt do that bit yet, I`ll do it now, CWM failed on its own ...

Re: HELP! I need somebody, HELP! Not just anybody! HEEEEELP!

PostPosted: January 28th, 2011, 1:02 pm
by Detection
Fixed and restoring to my latest backup - Thanks Charlie!


In retrospect... installing the updates was my ultimate downfall.... but in light of the new discovery.. I am thinking now there is no real way to brick these things without a hammer

Re: HELP! I need somebody, HELP! Not just anybody! HEEEEELP!

PostPosted: January 28th, 2011, 1:10 pm
by Kommander
Ahh the love of indestructable (and open-source programmed hardware)!

Unlike closed source devices *looks at Apple specifically* droid devices seem to be pretty hard to screw up. I'm sure there *is* a way, but you'd have to be pretty daft to pull it off!

Re: HELP! I need somebody, HELP! Not just anybody! HEEEEELP!

PostPosted: January 28th, 2011, 1:13 pm
by Charlie
Detection wrote:Fixed and restoring to my latest backup - Thanks Charlie!


In retrospect... installing the updates was my ultimate downfall.... but in light of the new discovery.. I am thinking now there is no real way to brick these things without a hammer


Your welcome, you have helped me loads in the past too.

My view on 'Bricking' - If you know enough stuff to get out of a bad situation, then bricking is not possible - but some things need know-how on, e.g ADB to put some things back right. - So if you can not use ADB (for example) then technically you would have a brick. ;)

Re: HELP! I need somebody, HELP! Not just anybody! HEEEEELP!

PostPosted: January 28th, 2011, 1:28 pm
by Detection
Well... I did not know ADB when I first got this tablet, so thanks to this place I learned how to use it

Re: HELP! I need somebody, HELP! Not just anybody! HEEEEELP!

PostPosted: January 28th, 2011, 1:29 pm
by Charlie
Detection wrote:Well... I did not know ADB when I first got this tablet, so thanks to this place I learned how to use it


Ditto :D