Page 1 of 1

Time/CLock Re-sets when i restart??

PostPosted: January 29th, 2011, 1:09 pm
by Dub77
Can anyone help with my time/ clock issue.... the time on the top bar always goes back to what it said when i set it after a restart??
It works fine up untill i restart the scroll if i turn on at 12.10 and turn off at 12.35 it will say 12.35 then turn back on and it will say 12.10......??????
Getting frustrating now :evil: :evil: :evil:

Cheers
Darren

Re: Time/CLock Re-sets when i restart??

PostPosted: January 29th, 2011, 5:34 pm
by Mac
a good tip is to add which firmware your using to your signature, letting others know what you have. seems trivial, but is a massive help if you need assistance. saves the same first question being asked... ie.

what firmware version are you on?

Re: Time/CLock Re-sets when i restart??

PostPosted: January 29th, 2011, 5:54 pm
by Dub77
Yea that's on my to do list :)
Version 1.01

Re: Time/CLock Re-sets when i restart??

PostPosted: January 30th, 2011, 12:40 am
by Detection
IN a PC you have the internal hardware clock and also the OS clock

It sounds like the internal hardware clock is either 1. not working or 2. unable to talk to the OS

I would hazzard a guess at the 2nd of the two, and the firmware being the reason

Re: Time/CLock Re-sets when i restart??

PostPosted: January 30th, 2011, 2:50 pm
by Dub77
Hi thanks for the reply. So if I have rooted my scroll does that mean I can't flash the FW ??

Darren