How to Install Clockworkmod on the Scroll Tablet - NOT Excel

Step by Step Guides and Tutorials here. (older models)

Re: How to Install Clockworkmod Recovery on the Scroll Table

Postby Charlie » January 8th, 2011, 12:34 am

Warpedflash wrote:Yea just unplug it with the screen frozen and plug it back in then tell me what its reconised as


it comes back in device mgr as other devices > android (so no usb driver, then?!?)

where b4 it was in android > android phone
" Just because you could, doesn't mean you should. "
User avatar
Charlie
Trusted Developer
Trusted Developer
 
Posts: 2471
Joined: December 28th, 2010, 8:41 pm
Location: UK
Real Name: Charlie
Scroll Version: Moto G 16GB (4.4.2 rooted)
Nexus 7 - G1 (4.4.2 rooted)
Huawei Y300 (4.1.1 rooted - TWRP)
MK809 (4.1.1 rooted - CWM)
Raspberry Pi B (512MB)

Retired: Excel (CM10) & 1st Gen' (2.1) Tab'.

Re: How to Install Clockworkmod Recovery on the Scroll Table

Postby Warpedflash » January 8th, 2011, 12:41 am

charlie wrote:
Warpedflash wrote:Yea just unplug it with the screen frozen and plug it back in then tell me what its reconised as


it comes back in device mgr as other devices > android (so no usb driver, then?!?)

where b4 it was in android > android phone

Right! thats good! you can install the android driver for it again :P
I think its because you have a slightly hacky driver and the bootloader interface (the frozen screen) is different to the normal development adb interface.
Firmware Version: 1.01 - Latest known update - Locked Bootloader - No Market
viewtopic.php?f=27&t=125 - How to Root your Scroll
viewtopic.php?f=27&t=127 - How to Install Clockwork
viewtopic.php?f=27&t=147 - How to Replace build.prop
User avatar
Warpedflash
Scroll Genuis
Scroll Genuis
 
Posts: 723
Joined: January 4th, 2011, 5:36 pm

Re: How to Install Clockworkmod Recovery on the Scroll Table

Postby Charlie » January 8th, 2011, 12:51 am

Warpedflash wrote:
charlie wrote:
Warpedflash wrote:Yea just unplug it with the screen frozen and plug it back in then tell me what its reconised as


it comes back in device mgr as other devices > android (so no usb driver, then?!?)

where b4 it was in android > android phone

Right! thats good! you can install the android driver for it again :P
I think its because you have a slightly hacky driver and the bootloader interface (the frozen screen) is different to the normal development adb interface.


only probs at that stage - when i have to install the driver again - i have to restart the pc for it to work and then uplug the scroll & back in again - is that not going to mess up the second part of clockwork mod?

(my hacky driver ;) .... yes is very very hacky - most likey f**ed) that's why it would have been nice to see what diego had in his file, from his interpretation of my unconfirmed hack. so i could compare it with mine :)
" Just because you could, doesn't mean you should. "
User avatar
Charlie
Trusted Developer
Trusted Developer
 
Posts: 2471
Joined: December 28th, 2010, 8:41 pm
Location: UK
Real Name: Charlie
Scroll Version: Moto G 16GB (4.4.2 rooted)
Nexus 7 - G1 (4.4.2 rooted)
Huawei Y300 (4.1.1 rooted - TWRP)
MK809 (4.1.1 rooted - CWM)
Raspberry Pi B (512MB)

Retired: Excel (CM10) & 1st Gen' (2.1) Tab'.

Re: How to Install Clockworkmod Recovery on the Scroll Table

Postby Warpedflash » January 8th, 2011, 1:55 am

charlie wrote: only probs at that stage - when i have to install the driver again - i have to restart the pc for it to work and then uplug the scroll & back in again - is that not going to mess up the second part of clockwork mod?

(my hacky driver ;) .... yes is very very hacky - most likey f**ed) that's why it would have been nice to see what diego had in his file, from his interpretation of my unconfirmed hack. so i could compare it with mine :)


You can leave the scroll on the frozen splash screen as long as you want it wont care lol.
I dont understand the reason you cant install the offical google drivers (I think i had a similar problem a while ago with my streak) I cant be anymore help until i get my scroll really :S sorry
Firmware Version: 1.01 - Latest known update - Locked Bootloader - No Market
viewtopic.php?f=27&t=125 - How to Root your Scroll
viewtopic.php?f=27&t=127 - How to Install Clockwork
viewtopic.php?f=27&t=147 - How to Replace build.prop
User avatar
Warpedflash
Scroll Genuis
Scroll Genuis
 
Posts: 723
Joined: January 4th, 2011, 5:36 pm

Re: How to Install Clockworkmod Recovery on the Scroll Table

Postby Charlie » January 8th, 2011, 2:05 am

Warpedflash wrote:
charlie wrote: only probs at that stage - when i have to install the driver again - i have to restart the pc for it to work and then uplug the scroll & back in again - is that not going to mess up the second part of clockwork mod?

(my hacky driver ;) .... yes is very very hacky - most likey f**ed) that's why it would have been nice to see what diego had in his file, from his interpretation of my unconfirmed hack. so i could compare it with mine :)


You can leave the scroll on the frozen splash screen as long as you want it wont care lol.
I dont understand the reason you cant install the offical google drivers (I think i had a similar problem a while ago with my streak) I cant be anymore help until i get my scroll really :S sorry


does this info help -

Android phone/tabs seem to have different manufacturer / device IDs for the standard ADB interface

Also can you point me to where the offical google drivers are - so i can download them again. thanks
" Just because you could, doesn't mean you should. "
User avatar
Charlie
Trusted Developer
Trusted Developer
 
Posts: 2471
Joined: December 28th, 2010, 8:41 pm
Location: UK
Real Name: Charlie
Scroll Version: Moto G 16GB (4.4.2 rooted)
Nexus 7 - G1 (4.4.2 rooted)
Huawei Y300 (4.1.1 rooted - TWRP)
MK809 (4.1.1 rooted - CWM)
Raspberry Pi B (512MB)

Retired: Excel (CM10) & 1st Gen' (2.1) Tab'.

Re: How to Install Clockworkmod Recovery on the Scroll Table

Postby JimmyW » January 8th, 2011, 3:04 am

You could always try pdanet which installs what for me were a good set of drivers...

Sent from my Scroll Tablet using Tapatalk
*JimmyW runs around waving a stick shouting "OUT! OUT! YOU DEMONS OF STUPIDITY!"

kernel: 2.6.29 | build: steroidROM 2.2 beta 1| Rooted | Clockwork | FlashliteImage
User avatar
JimmyW
Donator
Donator
 
Posts: 324
Joined: January 7th, 2011, 10:24 am
Location: Middlesbrough, UK

Re: How to Install Clockworkmod Recovery on the Scroll Table

Postby Steveee-B » January 8th, 2011, 9:46 am

I like a few others am having no joy getting these drivers installed.
My laptop is running Windows 7 Home Premium Edition (64 bit I believe).
In device manager under other devices it says !Android Eclair.
I have tried the drivers included in the download link in this thread and when I try to update/install the drivers its just says there are no suitable drivers?
I have also tried the link to the sdk developers Android when I try to use there sdk download it then says I need java to run the pack. I installed java but it still won't install the sdk....
I spent a couple of hours trying to get just the driver installed last night but got no where.

Any ideas where I can just download the driver I need for Windows 7?
Scroll Tablet: S1008 iplug Tablet 7m
Firmware: 1.00
Kernel: 2.6.29
Android 2.1

Rooted, Clockworkmod Recovery, Warpedflash's Custom update.

HTC Desire

Windows XP Media Center/Vista 64bit Home Basic (Duel boot) PC
Windows 7 Home Premium laptop(64bit)
User avatar
Steveee-B
Donator
Donator
 
Posts: 43
Joined: January 3rd, 2011, 11:14 am

Re: How to Install Clockworkmod Recovery on the Scroll Table

Postby Diego » January 8th, 2011, 9:56 am

Sorry for the maddening delay m8. The wife called me to bed to watch a movie.

Here's the file: http://naphoria.com/android_winusb.rar

Steveee: try adding the lines as added to the 32bit section to your 64bit section, with obvious changes.
ImageImageThere's only one way off, might as well enjoy the ride..
Image
_________________________________________________________
firmware v1.00 kernel 2.6.29 Andriod 2.1
User avatar
Diego
Donator
Donator
 
Posts: 474
Joined: December 28th, 2010, 12:50 pm
Location: Naphoria

Re: How to Install Clockworkmod Recovery on the Scroll Table

Postby Charlie » January 8th, 2011, 10:20 am

Diego wrote:Sorry for the maddening delay m8. The wife called me to bed to watch a movie.

Here's the file: http://naphoria.com/android_winusb.rar

Steveee: try adding the lines as added to the 32bit section to your 64bit section, with obvious changes.


could you have sent it as a txt file instead? why compress a tiny file? lol
" Just because you could, doesn't mean you should. "
User avatar
Charlie
Trusted Developer
Trusted Developer
 
Posts: 2471
Joined: December 28th, 2010, 8:41 pm
Location: UK
Real Name: Charlie
Scroll Version: Moto G 16GB (4.4.2 rooted)
Nexus 7 - G1 (4.4.2 rooted)
Huawei Y300 (4.1.1 rooted - TWRP)
MK809 (4.1.1 rooted - CWM)
Raspberry Pi B (512MB)

Retired: Excel (CM10) & 1st Gen' (2.1) Tab'.

Re: How to Install Clockworkmod Recovery on the Scroll Table

Postby Steveee-B » January 8th, 2011, 10:27 am

cheers Diego, I will give it a try and let you know how I get on mate.
Scroll Tablet: S1008 iplug Tablet 7m
Firmware: 1.00
Kernel: 2.6.29
Android 2.1

Rooted, Clockworkmod Recovery, Warpedflash's Custom update.

HTC Desire

Windows XP Media Center/Vista 64bit Home Basic (Duel boot) PC
Windows 7 Home Premium laptop(64bit)
User avatar
Steveee-B
Donator
Donator
 
Posts: 43
Joined: January 3rd, 2011, 11:14 am

PreviousNext

Return to Guides and HOW TO Tutorials for Various Scroll Tablets

Who is online

Users browsing this forum: No registered users and 1 guest

cron