how to go back to 2.1 from CM7

[jamie3]

i thought i did but may be i didnt.

[Mitre]

just blowing the dst off my old scroll will hve a look

[Mitre]

ok it looks like you didnt backup with CWM so you will have to flash the mtd blocks can you look inside the proc mtd thatyou dumped tell me whats inside

[jamie3]

this is what is inside
dev: size erasesize name
mtd0: 00a00000 00080000 "boot"
mtd1: 00500000 00080000 "kpanic"
mtd2: 09600000 00080000 "system"
mtd3: 00400000 00080000 "splash"
mtd4: 02800000 00080000 "cache"
mtd5: 12100000 00080000 "userdata"
mtd6: 00a00000 00080000 "recovery"
mtd7: 00200000 00080000 "misc"
mtd8: 00200000 00080000 "tcc"

[Mitre]

you should be able to unzip put the mtd images onto the sd not in any folder then choose them and flash them all except recovery as you dont want to lose CWM and maybe not boot as its easier to fix


or---

if you want i can get you a clean 2.1 backup off mine and give you a link i am shure as you said you have the 4k version its not the 102s but it is the 102 firmware same as mine if yours is the s it will brick but should still have CWM

[jamie3]

i think i will go to the clean back up as cm7 is not working well for me as in video doesnt work nor you tube nor angry birds.

[jamie3]

mine is not the s version by thw way.

[Mitre]

is it resistive screen?

[jamie3]

yes it is

[Mitre]

i wuld like you to try nd flash the mtds and if it fails do the clean 2.1 from mine i am factory reseting now but if you can flash the mtd it would be a good test for other devices what do you think