How to Install Clockworkmod on the Scroll Tablet - NOT Excel

[pwilko123]

Nothing happened, however, i did take the time to look at what windows did, the second device driver it loads is different from the first. Initially the device driver is ADB interface device, and when i run the first batch file, the second device driver is entitled goofle fastboot device loader.

[pwilko123]

It seems that the drivers used during the process are actually named differently, but unless you took the time to look at the detials you would necessarily know

[Charlie]

It seems that the drivers used during the process are actually named differently, but unless you took the time to look at the detials you would necessarily know

thanks for your help - i am just going to try a idea i have now from your info.

[Charlie]

It seems that the drivers used during the process are actually named differently, but unless you took the time to look at the detials you would necessarily know

thanks for your help - i am just going to try a idea i have now from your info.

tested idea - i am 90% sure it 's ok -

What is the worst that can happen when the 2nd batch file does not flash the the scroll like it should, because of my usb hack??

[pwilko123]

I woulg imagine that the second batch file doesn't run, nothing. If it runs,starts flashing but stops, you will no longer have a maintenance mode. In all honesty I'm not sure,

From experience with flashing BIOS from Rome in PC's, if the commands from the batch file are recognised by the scroll, it will work. But I am a n9vice at android

Wo

[Charlie]

I woulg imagine that the second batch file doesn't run, nothing. If it runs,starts flashing but stops, you will no longer have a maintenance mode. In all honesty I'm not sure,

From experience with flashing BIOS from Rome in PC's, if the commands from the batch file are recognised by the scroll, it will work. But I am a n9vice at android

Wo

ok - when done and the scroll is back on - how do i confirm that the clockworkmod has been flashed ok?

[pwilko123]

To check, shut down, and power up holding volume up to enter maintenance mode, it willbe obvious as you will have many more options and it will sayclockwork recovery or nandroid

[Charlie]

To check, shut down, and power up holding volume up to enter maintenance mode, it willbe obvious as you will have many more options and it will sayclockwork recovery or nandroid

thanks

[Warpedflash]

You can run the first one twice it will just reboot it to the scroll screen twice

Edit no it won't im a dumb ass. The second batch file is fastboot not adb

Sent from my Dell Streak using Tapatalk

[Charlie]

You can run the first one twice it will just reboot it to the scroll screen twice

Edit no it won't im a dumb ass. The second batch file is fastboot not adb

Sent from my Dell Streak using Tapatalk

I looked at what windows did, the second device driver it loads is different from the first. Initially the device driver is 'android composite ADB interface' , and when i run the 1st batch file, the second device driver is 'android ADB interface'. - any thoughts?