Scroll Extreme Case?

[Whistler23]

Case fits a treat' much better than cheap ebay effort

Thanks Gizzit, looks like I'll be ordering one!

[anomaly]

Just got mine. It seems pretty good... except for the fact it obscures the power socket and the hdmi?! Seems really odd when all the other controls and ports are accessible. They could have just moved the leather bit further towards the corner. Guess I need to get the stanley knife out and hope it will hold.

[Piers]

It's not actually a case made for Storage Options or the Scroll Extreme - it's a case that costs £3 if you are in China and was designed for the V1 generic version of the same tablet

[Gizzit]

Yea, kinda guessed that ... it's branded as a "Scroll 9.7 Folio", not specific to the extreme, but you can't expect too much I guess. The main thing is it fits the corners of the tablet properly and has a camera cut-out in the right place - not all the ports have dedicated cut-outs (as anomaly mentioned) but it's probably gunna be as good as you will get out there!

(top tip by the way, rather than using a stanley knife to make extra holes, use a hot screwdiver tip or something similar and 'melt' a hole rather than cutting one. It stinks a bit but looks a lot neater - if you are VERY careful - and will be a bit sronger ).

I know these are just re-branded Chinese tablets (and accessories), and that's fine as long as they do what they are supposed to and that the quality is good enough - which so far, seem to be

[anomaly]

(top tip by the way, rather than using a stanley knife to make extra holes, use a hot screwdiver tip or something similar and 'melt' a hole rather than cutting one. It stinks a bit but looks a lot neater - if you are VERY careful - and will be a bit sronger ).

Yeah I ended using a screwdriver too as I only really cared about making the round power socket available. I didn't try it heated so will give that a shot to tidy up the hole I've made.. thanks for the tip