Motion sensor all back to front?

[Detection]

The only option I could see was to centre the sensor... Couldn't spot anything about axis swapping.

Under the calibrate option

Invert X, Y axis

Swap x/y sxis


EDIT - I had to Invert Y Axis and Swap X/Y Axis

[samtheeagle]

I shall install it again this evening and see if I can get it to play properly

[idlemarvel]

FYI I installed it and had the same problems, so upgrading to 1.2 won't help it seems. Sorry.
Also I did not see any options to swap x-y axis in the game settings. This was version 23.

[samtheeagle]

Just to let you know that I was clearly blind first time around, as I have now located the axis config options, and managed to get it to work properly. Same settings as Detection described above IIRC.